Total Pressure Head Depiction

A discussion forum for users of the new HYDRUS 2D/3D. HYDRUS is a software package for simulating water, heat and solute movement in two- and three-dimensional variably saturated media. Happy Posting!
Post Reply
Falk
Posts: 17
Joined: Fri May 11, 2012 9:18 am
Location: Germany

Total Pressure Head Depiction

Post by Falk » Sat Aug 24, 2019 6:29 am

Hello,

I was simulating a 3D general mesh model for infiltration from a ditch.
Actually, the model calculation has been finished successfully and water content and pressure head distribution looks reasonable.
However, if I switch to total pressure head the values of pressure head a kept in the visualization which cannot be the case if gravitation head (i.e. elevation) changes vertically.
I checked it with other models and also on a second computer, but the error occurs again. This is my first model with the 3.xx version, I thought with Hydrus 2.xx is worked always.
Did I miss something by using Hydrus 3.xx or has anybody an idea to overcome this problem?

Thanks,

Falk

Jirka
Posts: 4733
Joined: Sat Mar 16, 2002 3:47 pm
Location: USA
Location: Riverside, CA

Re: Total Pressure Head Depiction

Post by Jirka » Sat Aug 24, 2019 7:13 pm

Hi Falk,

Indeed, it seems that the display of the total pressure head does not work in Version 3. I will ask my colleagues in Prague to fix it asap. Thanks for letting us know about this bug.

Jirka

Post Reply