Trigger irrigation scheduling

A discussion forum for Hydrus-1D users.
Post Reply
Dauto
Posts: 2
Joined: Thu Jul 11, 2019 6:43 pm
Location: Italy

Trigger irrigation scheduling

Post by Dauto » Thu Jul 11, 2019 9:26 pm

Hi,
I want to do a simulation for 30 consecutive years, to test the effect of saline irrigation.
I would like to consider herbaceous crops that are not present for the whole year.
By choosing the triggered irrigation option, how can I select the period I want to irrigate?
For example, from 150 to 250 DOY for each year.
This would avoid so that the simulation is also provided irrigation out of the period of my interest.
Thanks in advance

Jirka
Posts: 4733
Joined: Sat Mar 16, 2002 3:47 pm
Location: USA
Location: Riverside, CA

Re: Trigger irrigation scheduling

Post by Jirka » Mon Jul 15, 2019 2:14 pm

The model does not have an option to select only some part of the season for triggered irrigation. If you want to do that, you need to split the simulation into multiple simulations, while importing results of preceding simulation as the initial condition of the subsequent simulation.

J.

Dauto
Posts: 2
Joined: Thu Jul 11, 2019 6:43 pm
Location: Italy

Re: Trigger irrigation scheduling

Post by Dauto » Mon Jul 22, 2019 3:23 pm

Thanks for the advice!

D.

Post Reply