plot of fitted curve on results of CXTFIT

A discussion forum for STANMOD users. STudio of ANalytical MODels is a software package for evaluating solute transport in porous media using analytical solutions of the convection-dispersion solute transport equation.

Post Reply
Posts: 1
Joined: Wed Jan 18, 2012 3:58 pm

plot of fitted curve on results of CXTFIT

Post by woessner » Wed Jan 18, 2012 4:03 pm

I am using CXTFIT to fit some column test data. I reviewed the results and see the fitted parameters, however, I want to have the fitted curve plotted on the experimental output. I seem to remember getting a blue line representing the fitted result plotted on the data in prevous uses. How do you get this curve, does it have to be generated outside of the program?

Posts: 5268
Joined: Sat Mar 16, 2002 3:47 pm
Location: USA
Location: Riverside, CA

Post by Jirka » Wed Jan 18, 2012 7:03 pm

The curve should be shown together with the fitted data. See all the inverse examples. If it is not, then you have something wrong, or fitted concentrations are zero. J.

Post Reply