n greater than 1.1 for coarse textured surface soils and less than 1.05 for fine textured subsurface soils

A discussion forum for old Hydrus-1D users.
Post Reply
tamjos95@gmail.com
Posts: 4
Joined: Mon Feb 21, 2022 7:04 pm
Location: Germany

n greater than 1.1 for coarse textured surface soils and less than 1.05 for fine textured subsurface soils

Post by tamjos95@gmail.com » Thu Oct 20, 2022 1:06 pm

Hi Jirka,
I am using Hydrus 1D to estimate the soil drainage flux for my tropical site based on hydraulic properties estimated with five pedotransfer functions. I have coarse-textured soil between 0-30 cm and fine-textured subsurface soil between 30-100 cm, hence some PTFs predict n that is greater than´1.1 for the coarse-textured surface soils and n that is less than 1.05 for the fine-textured subsurface soils. Would you recommend in such a situation to check the air entry value of - 2 cm when selecting the normal VG-M model? I always run into non-convergence issues for one PTF. I have tried checking the air entry value for all the PTFs but the results look somewhat artificial. Kindly advise!
Thank you

Jirka
Posts: 6255
Joined: Sat Mar 16, 2002 3:47 pm
Location: USA
Location: Riverside, CA

Re: n greater than 1.1 for coarse textured surface soils and less than 1.05 for fine textured subsurface soils

Post by Jirka » Thu Oct 20, 2022 6:01 pm

We always recommend using the option with the air-entry value when n is small (<1.2). J.


Post Reply