infiltration problem

A discussion forum for Hydrus-1D users.
Post Reply
nessrine
Posts: 25
Joined: Sun Jun 28, 2015 9:38 pm
Location: Tunisia

infiltration problem

Post by nessrine » Tue Mar 16, 2021 10:39 pm

Hi
I'm working with Hydrus 1D on drip irrigation problem

i'm trying to calculate the water balance , in fact the total irrigation and rainfall input are equal to 1342 mm however in the out-put file cumulative infiltration is equal to 1700 mm I do not Understand the difference between them. It should be the same infiltration = (irrigation+rainfall)

thank you indeed

Jirka
Posts: 5216
Joined: Sat Mar 16, 2002 3:47 pm
Location: USA
Location: Riverside, CA

Re: infiltration problem

Post by Jirka » Tue Mar 16, 2021 11:23 pm

The output should certainly correspond with what you input. You must be making some errors somewhere, e.g., representing entered values as water depths rather than water fluxes. All the inputs are in units of [L/T]. J.

nessrine
Posts: 25
Joined: Sun Jun 28, 2015 9:38 pm
Location: Tunisia

Re: infiltration problem

Post by nessrine » Wed Mar 17, 2021 4:10 pm

thank you the problem was solved :)

Post Reply