Cannot open h1d projects

A discussion forum for Hydrus-1D users.
Post Reply
jimboonman
Posts: 8
Joined: Mon May 04, 2020 9:20 am
Location: Netherlands

Cannot open h1d projects

Post by jimboonman » Tue Jan 26, 2021 5:18 pm

Dear Mirek and Jirka,

Unfortunately I am not able to open Hydrus 1D projects. My system runs (recently installed) Windows 10 and I installed the latest Hydrus 1D version (4.17.0140).

I tried opening the project from the Hydrus GUI (with and without administrator rights), but the following error appears:
Capture.PNG
Capture.PNG (6.7 KiB) Viewed 663 times
Also, I tried opening the .h1d file by clicking it directly. Then this error appears:
Capture2.PNG
Capture2.PNG (5.18 KiB) Viewed 666 times


I made sure all the users have the rights to edit/read the file PCPINFOR.SYS, and I did the same for the whole HYDRUS-1D 4.xx folder.
When opening h1d files previously I also received this error, but after continuing the projects still always opened. Now this is not the case.

I hope you could help me, thanks in advance.


Best regards,
Jim
Attachments
Capture3.PNG
Capture3.PNG (6.04 KiB) Viewed 665 times
Capture2.PNG
Capture2.PNG (5.18 KiB) Viewed 665 times
Capture3.PNG
Capture3.PNG (6.04 KiB) Viewed 666 times

Jirka
Posts: 5216
Joined: Sat Mar 16, 2002 3:47 pm
Location: USA
Location: Riverside, CA

Re: Cannot open h1d projects

Post by Jirka » Tue Jan 26, 2021 6:46 pm

I cannot help with this since I have never encountered such a problem. You should always try to open h1d projects using the HYDRUS GUI and not directly by clicking at them. I’m running Windows 10 as well. J.

Oceane
Posts: 1
Joined: Wed Feb 24, 2021 12:53 pm
Location: France

Re: Cannot open h1d projects

Post by Oceane » Wed Feb 24, 2021 1:32 pm

Hello,
I have the same problem,
Did a solution has been found ?
Thank you

Mirek
Posts: 444
Joined: Sat Mar 16, 2002 4:00 pm
Location: Czech Republic
Contact:

Re: Cannot open h1d projects

Post by Mirek » Wed Feb 24, 2021 1:56 pm

It is not possible to open * .h1D projects by double-clicking on a project file (i.e. via association of the * .h1d extension with Hydrus1.exe in Windows system). This does not work and it will only work in the new version of Hydrus-1D (version 5) once it is released.

Post Reply