Hydrus Root Growth problems

A discussion forum for Hydrus-1D users.
Post Reply
theodorb
Posts: 12
Joined: Sun Jul 01, 2018 3:54 pm
Location: Israel

Hydrus Root Growth problems

Post by theodorb » Mon Jul 02, 2018 6:05 am

Hi,
I am having a lot of trouble trying to use the new root growth module:
1) Outside the examples, Root.in file is not generated (and not clear if all the parameters there can be specified in the GUI).
2) When running the examples, Root.out is being deleted (when I run it on Linux it is generated but all RLD values are zero).

Thanks,

Theodor Bughici

PhD candidate, Prof. Naftali Lazarovitch's lab
Ben-Gurion University

Jirka
Posts: 4986
Joined: Sat Mar 16, 2002 3:47 pm
Location: USA
Location: Riverside, CA

Re: Hydrus Root Growth problems

Post by Jirka » Mon Jul 02, 2018 9:38 am

a) I believe that we do say that pretty clearly that the root growth module is a non-standard add on HYDRUS module, which is not fully supported by GUI and that its users have to create the root.in file manually. Thus, this should be very clear to anyone actually reading the manual.
b) Linux: I have never used this OS and do not plan to. Thus, you need to resolve problems with this OS yourself. Good luck with that.

J.

theodorb
Posts: 12
Joined: Sun Jul 01, 2018 3:54 pm
Location: Israel

Re: Hydrus Root Growth problems

Post by theodorb » Mon Jul 02, 2018 9:42 am

Thanks a lot for the fast reply.
I'll give it a try.

By the way, Hydrus 1D works very well on Linux.

Theodor

Post Reply