Need help on FE-Mesh generating

A discussion forum for users of the new HYDRUS 2D/3D. HYDRUS is a software package for simulating water, heat and solute movement in two- and three-dimensional variably saturated media. Happy Posting!
Post Reply
RonRainmaple
Posts: 7
Joined: Thu Aug 13, 2015 6:11 pm
Location: USA

Need help on FE-Mesh generating

Post by RonRainmaple » Sun Dec 20, 2020 4:43 am

Hi HYDRUS expert,

I am trying to build a two ponds system for seepage and infiltration calculation.
I got a problem when generating the FE-mesh.\
It says : T3D internal error.
What should I do to solve it?

Thanks in advance! :D
Attachments
Mesh01.zip
(75.88 KiB) Downloaded 44 times

Mirek
Posts: 447
Joined: Sat Mar 16, 2002 4:00 pm
Location: Czech Republic
Contact:

Re: Need help on FE-Mesh generating

Post by Mirek » Sun Dec 20, 2020 9:02 am

The topology of your transport domain has many errors - see attached document Topo_Errors.pdf. These errors must be corrected. I recommend you to read "HYDRUS Geometry and B-Rep Model" at:
https://www.pc-progress.com/en/OnlineHe ... Model.html
https://www.pc-progress.com/en/OnlineHe ... heirS.html
BRep.jpg
BRep.jpg (484.89 KiB) Viewed 654 times
Attachments
Topo_Errors.pdf
(1.24 MiB) Downloaded 50 times

RonRainmaple
Posts: 7
Joined: Thu Aug 13, 2015 6:11 pm
Location: USA

Re: Need help on FE-Mesh generating

Post by RonRainmaple » Tue Dec 22, 2020 8:04 pm

Thank you very much Mirek! That really saved me! Wish you have a nice and safe holiday!

Post Reply