stream line

A discussion forum for users of the new HYDRUS 2D/3D. HYDRUS is a software package for simulating water, heat and solute movement in two- and three-dimensional variably saturated media. Happy Posting!
Post Reply
mahdiye.latifi76
Posts: 10
Joined: Thu Sep 24, 2020 2:38 pm
Location: Iran

stream line

Post by mahdiye.latifi76 » Thu Nov 12, 2020 3:36 pm

Hello every one. I am simulating a drain by hydrus-2d and I need to see stream lines. how can I see stream lines in Hydrus-2d?
thank you

Mirek
Posts: 447
Joined: Sat Mar 16, 2002 4:00 pm
Location: Czech Republic
Contact:

Re: stream line

Post by Mirek » Thu Nov 12, 2020 3:56 pm

Hi, see attached figure:
Streamlines.jpg
Streamlines.jpg (449.9 KiB) Viewed 1374 times

Jirka
Posts: 5268
Joined: Sat Mar 16, 2002 3:47 pm
Location: USA
Location: Riverside, CA

Re: stream line

Post by Jirka » Thu Nov 12, 2020 6:17 pm

I would like to add that the option to display Streamlines is available only in Version 3. In prior versions, we only had the option “Flowing particles” available. For that, one had to define the initial position of “particles” prior to calculations. J.

mahdiye.latifi76
Posts: 10
Joined: Thu Sep 24, 2020 2:38 pm
Location: Iran

Re: stream line

Post by mahdiye.latifi76 » Fri Nov 13, 2020 6:28 am

Thanks for your help.

Post Reply