How to rectify B-rep consistent errors

A discussion forum for users of the new HYDRUS 2D/3D. HYDRUS is a software package for simulating water, heat and solute movement in two- and three-dimensional variably saturated media. Happy Posting!
Post Reply
saikiran
Posts: 4
Joined: Tue Feb 20, 2018 6:08 pm
Location: India

How to rectify B-rep consistent errors

Post by saikiran » Thu Mar 01, 2018 2:23 pm

i got error -38 and showing this
WARNING: Surface 69 is not B-rep consistent
WARNING: Surface 71 is not B-rep consistent
WARNING: Surface 74 is not B-rep consistent
WARNING: Surface 77 is not B-rep consistent
WARNING: Surface 80 is not B-rep consistent
WARNING: Surface 83 is not B-rep consistent
WARNING: Surface 86 is not B-rep consistent
WARNING: Surface 89 is not B-rep consistent
WARNING: Surface 92 is not B-rep consistent
WARNING: Surface 95 is not B-rep consistent
WARNING: Surface 98 is not B-rep consistent
WARNING: Surface 101 is not B-rep consistent
WARNING: Surface 104 is not B-rep consistent
WARNING: Surface 107 is not B-rep consistent
WARNING: Surface 110 is not B-rep consistent
WARNING: Surface 113 is not B-rep consistent
WARNING: Surface 116 is not B-rep consistent
WARNING: Surface 119 is not B-rep consistent
WARNING: Surface 122 is not B-rep consistent
WARNING: Surface 125 is not B-rep consistent
Warning: Iso size of region 1 is too large to generate iso elements
WARNING: Too fine octree around boundary face 846
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 965
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 1805
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 1925
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 2045
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 3106
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 3185
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 3185
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 2045
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 3185
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 3129
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 3185
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 3195
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 3185
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 3185
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 3195
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 3160
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 3195
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 3106
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 3185
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 3195
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 3185
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 3195
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 2045
Possible element quality degradation or meshing failure
WARNING: Too fine octree around boundary face 2045
Possible element quality degradation or meshing failure
07:39:52 --> Manipulation error
(routine t3d_search_region_point_neighbourhood, file ..\..\..\..\..\..\..\Users\dr\T3d-qhm\src\discret3.c, line 6673)
Node 2251 and active face 22501 in region 1 are too close to each other (temporary node and face numbers)
Altogether 46 warnings have been generated

Post Reply