Problem with importing initial conditions

A discussion forum for old Hydrus-2D & Meshgen. Happy Posting!
Download PDF document with all topics (February 8, 2008, 1.9MB):
http://www.pc-progress.com//Downloads/F ... on_H2D.pdf
Post Reply
Preecha
Posts: 18
Joined: Sat Mar 16, 2002 4:05 pm
Location: USA

Problem with importing initial conditions

Post by Preecha » Wed Nov 26, 2003 4:04 pm

Dear HYDRUS users,

I have a problem with importing initial conditions from the previous run results. The new file was created by copying from the previous file using project manager. While the previous file can be run successfully, floating point errors message appeared when execution in the copied file with the imported initial conditions, and the calculation stopped. This problem occurred when I tried to import the inital conditions at any time level besides the first time step.

Is there any solution to this problem without having to rerun the previous simulation again because the simualtion takes a long time?

Kind regards,

Preecha



Edited by - Preecha on 11/26/2003 18:20:38

Post Reply